![]() You can even install Windows Vista with USB 2.0 flash memory drive now. All you need is a high speed 4GB flash memory only to create a bootable Windows Vista on(.). Here's a tip to save you hunting for the solution to fix this "Windows no disk" problem in Windows XP (UPDATE: a commenter says changing the drive letters works in. This little tool will set the dirty bit flag on a drive. When the dirty bit flag is set, Windows will perform a disk check and repair any errors it find at the next. MDGx AXCEL216 MAX Speed Performance Windows 10 2012 8.1 8 7 2008 Vista 2003 XP SP1 SP2 SP3 ME 2000 98 SE OSR2 OSR1 95 NT4 NT 3.11 3.1 3.10 DOS 6 Tricks Secrets Tips. SATA drive detected in BIOS but NOT in Windows Disk Management. OK, deca, thanks for the info. Win XP does not have built- in drivers for . So you usually have two options. One is a common one in most current mobos. Within BIOS Setup right close to where you Enable your SATA ports, there is a place to set the port's mode, and choices usually include: IDE (or PATA) Emulation, native SATA, AHCI, or RAID. You do NOT want RAID, unless your mobo is one of those that treats everything that is not plain IDE as some sub- version of RAID. IDE (or PATA) Emulation has the mobo make the actual SATA port appear to Windows to be just a plain IDE drive that it already understands, and it all works with no problems. This is a technical feature comparison of different disk encryption software.Well, almost - to do this, you are deprived of using a few advanced features of a real SATA device. However, if you want those features, you can have them. This simply means two things: you set your mode to AHCI (preferred) or native SATA, AND you then must install in Windows the driver necessary to use that device (AHCI or SATA, as chosen).
Installing a driver in Windows is a standard operation, like any other device. Where to get the driver? It may already be on a CD that came with your mobo. In fact, may of those CD's have a utility you run to select and install particular drivers, depending on your needs. ![]() Alternatively (may even be a better choice), go to the website of your mobo maker to find and download the latest updated correct driver - that is, the one BOTH for your mobo and for your OS (Win XP Pro SP2), then install it. Once that is set up, your new drive will be usable by Windows as a data drive because it will load that driver from the C: boot drive when it starts up. It just cannot be used for booting, which you do not plan to do. The BIOS will see it and, with the matching SATA port mode set and driver installed (needed if not IDE Emulation), Windows will be aware it exists as a piece of hardware, BUT it still will not show up in My Computer. You need to use Windows Disk Management to do two jobs: Partition and Format that new unit. Click on Start at bottom left and in the menu RIGHT- click on My Computer and choose . On its left click to expand . This will open two panes on the right, each of them scrolling to reveal their whole contents. The upper one shows you only the devices Windows already knows how to use. ![]() ![]() ![]() ![]() ![]() ![]() The lower one also shows you the hardware Windows can see, including some devices Windows does not yet understand. Each device is represented by a large horizontal block. On its left end is a smaller label block with things like . To the right will be one or more large sub- blocks representing Partitions already defined. Each of these will have a letter name like your C: drive, its size and File System, and a bit more. If there is some space not yet assigned to a Partition, it will be a block further to the right called . The main block representing your optical drive will not have all this stuff because you cannot define a Partition on such a device. Now, your new disk should be here with no letter name and no info beyond its basic label on the left end. RIGHT- click on its Unallocated Space and, from the menu, choose to Create a Partition on the drive. You'll have a choice of how big it should be and most likely want to use all the drive in one volume. If you do, when you are finished come back here and find the remainder shown as . You can create a second Partition or more in it if you want.) For this first Partition, make it the Primary or Active Partition, and NOT bootable because this drive is for data only - you already have a boot drive. When all the choices are made, go ahead with the Partition operation. When that is done, come back to this new Partition and RIGHT- click again and choose to Format it. Choose the NTFS File System option. A Quick Format will do the job in 5 to 1. A Full Format will do a Quick Format, then go though every sector of the drive and test it, marking off any faulty ones (very rare) so they won't be used. Full Format takes many hours! When you are done, exit out of Disk Management, reboot and your newly prepared hard drive should show up in My Computer as an empty unit ready for use.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
November 2017
Categories |